1 Vented 3-channel piercing spike – two for fluid and one for air – allows for rapid infusion when required. Guarantees flow, allows for use on collapsible bags and bottles.
The spike is mounted onto the popular easy to squeeze crystal clear filtered drip chamber.
The drip chamber incorporates the 'Ani-Chamber Tag™', a unique drip chamber tie for securing the spike and drip chamber into the base of the bag or bottle to prevent it being ‘pulled out’.
2 Flip covered bacterial air vent above soft compressible clear 15drps / ml drip chamber. Assists with priming and allows Aniset™ to be used on bottles or bags (open when using non-collapsible containers).
3 15 micron Filtered drip chamber prevents debris and contaminants from entering the animal or blocking the set.
4 V-Bed secure and precise flow controller roller clamp. Includes a parking slot/hold for excess tubing or associated sharps.
5 Removable/Reusable Slide Clamp Key (BAXTER sets only)
6 R-Clamp – Stop switch for immediate on/off control of fluid.
7 Y-style, finger guarded latex-free injection port for introduction of additional fluids or medication. Positioned at 50cm from the chamber, allowing the introduction of medication from outside of the recovery cage away from the animal patient. Finger guarded to reduce the risk of needle stick injuries.
8 Needle-Free (NF) injection valve. Allows the introduction of medication to the IV line without the use of needles, removing the incidence of needle stick related injuries. Also allows other IV accessories, extensions and secondary IV lines to be connected seamlessly without the need for needles, clamps or ancillary joining devices. Swabable.
9 Aniset® Set Break Point – Allows the distal end of the IV set to remain in place, undisturbed. The animal can be moved, walked, taken to pee without needing to remove the set from the catheter or accessory at the distal end. Allows new primed IV set to be added if additional fluids or new medication is needed. Prevents the need for a whole new set to be primed or used. Anitube-S™ 18m extension to lengthen the set.
10 Slide Clamp – Allows distal end of tube to remain primed with fluid if break point is used and the patient needs to be moved.
11 Latex-free injection port for administration of additional medication close to the patient. Small unobtrusive port, no finger guard for maximum animal patient comfort when in situ. Needle-Free option now available.
12 Optional loose Luer Lock connection that can be slid up the tube if not required or Slip Luer connection for connecting to catheter or alternative accessory as listed on previous page.
13 Auto Fill Air Cap – Allows the set to be primed and fill with fluid without removal, without fluid running out the end of the set. Also prevents the connector from becoming contaminated or dirty. Just ensure the fluid control valves above are open and watch the set automatically fill with fluid.